Card accessories
Sinara devices ship with the accessories listed below and use the following defaults unless otherwise requested. Alternatives are available at no cost; please confirm the configuration or request changes when ordering.
| Card | Accessories |
|---|---|
| 1124 Kasli v2 | 2x CGR, 1x SFP RJ45, 0-1x Power supply, 2x BiDi SFP + 1x 5m Fiber (DRTIO only) |
| 1125 Kasli-SoC | 2x CGR, 1x Micro SD card, 0-1x Power supply, 2x BiDi SFP + 1x 5m Fiber (DRTIO only) |
| 2118 BNC-TTL | 2x CGR, 1x 30IDC |
| 2128 SMA-TTL | 2x CGR, 1x 30IDC |
| 2238 MCX-TTL | 2x CGR, 2x 30IDC |
| 2245 RJ45-LVDS | 2x CGR, 2x 30IDC |
| 4410 Urukul | 2x CGR, 2x 30IDC, 1x MMCX |
| 4412 Urukul | 2x CGR, 2x 30IDC, 1x MMCX |
| 4456 Synthesizer Mirny | 2x CGR, 1x 30IDC, 1x MMCX |
| 4457 HF Synthesizer Mirny + Almazny | 4x CGR, 1x 30IDC, 1x MMCX |
| 4459 PDH lock generator Stabilizer + Pounder | 4x CGR, 1x 30IDC (power only) |
| 4624 Phaser Baseband | 2x CGR, 1x 30IDC, 1x MMCX |
| 4625 Phaser Upconverter | 2x CGR, 1x 30IDC, 1x MMCX |
| 5108 Sampler | 2x CGR, 1-2x 30IDC |
| 5432 DAC Zotino | 2x CGR, 1x 30IDC |
| 5518 BNC-IDC | 2x CGR, 1x 26IDC |
| 5528 SMA-IDC | 2x CGR, 1x 26IDC |
| 5538 MCX-IDC | 2x CGR, 4x 26IDC |
| 5568 HD68-IDC | 2x CGR, 1x HD68 (1 m default) |
| 5632 DAC Fastino | 2x CGR, 1x 30IDC |
| 5716 DAC Shuttler | 2x CGR, 1x 30IDC, 1x MMCX |
| 6302 Grabber | 2x CGR, 2-3x 30IDC |
| 7210 Clocker | 2x CGR, 1x 30IDC (power only), 1x MMCX |
| 8452 DSP Stabilizer | 2x CGR, 1x 30IDC (power only) |
| 8462 Fast DSP Fast Servo | 2x CGR, 1x 30IDC (power only) |
Remarks
- CGR — Card guide rails: Supplied as a pair (2 rails) per PCB. Multi-PCB assemblies receive two guide rails per individual PCB.
- MMCX — MMCX clock cable: One cable is included per standalone card requiring an internal or external clock signal.
- 30IDC — 30-pin IDC cable:
- Required for signal transmission unless designated "power only." Cards marked "power only" use the IDC interface exclusively to draw power; alternative supply options include an external 12 V DC barrel jack (front panel or PCB) or an ATX/Molex connector (PCB). For barrel-jack configurations, 12 V power bricks and DC splitter cables are available on request. For ATX power: where a Sinara 1106 EEM AC Power Module is present, we ship ATX power cables for the powering of these devices.
- Urukuls and Sampler require 2x EEM for SU-Servo mode or 1 ns RF switch control.
- Grabber take up to 3x EEM, we only ship 2x IDC cables as standard unless otherwise requested.
- 26IDC — 26-pin IDC cable: Standard ribbon cable provided for cards using 26-pin EEM headers.
- HD68 — HD68/HD68 SCSI cable: Ships with a 1 m cable by default; 2 m and 3 m lengths are available upon request at no additional charge.
- Power supply:
- Default is class I, with the crate connected to mains earth and an IEC C13 plug. The alternative is class II, with an electrically floating case and an IEC-C7 plug. The user must be fully aware of up to 120 V, 100 µA AC capacitive mains leakage current; this leakage may be harmful to sensitive equipment if the crate is not properly connected to system ground. AC mains cords are not included.
- Kasli v2 and Kasli-SoC shipments include a power brick where there is no EEM AC Power Module.
- SFP RJ45 — Ethernet transceiver:
- Kasli v2 includes one 1000BASE-T RJ45 SFP module by default; alternatives are Optical (1000BASE-LX10 or 1000BASE-BX10 paired transceivers with 15 m fiber) are available upon request.
- DRTIO systems: Default is a pair of 10 Gbps BiDi SFPs and 5 m fiber per required connection; alternatives are 50 cm or 1 m direct attach SFP passive copper cable.
- Micro SD card: Packaged with Kasli-SoC shipment.